Martha Washington Quarter-Sized Test Pieces
Set of 5 Different Experimental Finishes
Judd 2116 Cupro-Nickel Clad
NGC Certified
UNIQUE
$250,000
This is a historic and spectacular unique set of Martha Washington Test Pieces struck circa 1999. They are listed in the USPatterns website and have been assigned Judd 2116, which are the Martha Washington Quarter-Sized test pieces struck in cupro-nickel clad. This unique set consists of 5 different experimental finishes that the U.S. Mint was testing. The U.S. Mint did adopt the satin finish, which first appeared in the 2005-2010 Mint Sets, and the reverse proof finish, which first appeared on the 2006-P American Silver Eagle. To date, there are no U.S. coins struck with a brushed finish or antique finish.
Here are the 5 NGC certified Martha Washington Quarters with the different experimental finishes:
Martha Washington 25C - Satin Finish
Martha Washington 25C - Brushed Finish
Martha Washington 25C - Reverse Proof Finish
Martha Washington 25C - Proof Finish
In 1999 I discovered the first Martha Washington Test Piece that was struck on a U.S. cent planchet. It was authenticated and certified by NGC and was featured in a front page Coin World article.
A few years later, I discovered a group of 7 more Martha Washington Test Pieces in various U.S. planchet denominations and in several different compositions. These were also certified by NGC. Since then, a few other Martha Washington Test Pieces have surfaced. These have sold for as high as $25,000 each in public auctions and private sales.
I discovered the first Martha Washington Test Piece struck on a clad Quarter planchet. This coin is the plate coin for Judd #2115 on page 290 of the eighth edition of United States Pattern Coins, Experimental and Trial Pieces. Recently a second Martha Washington Quarter has been discovered. Click here for more info on the Martha Washington Quarter from uspatterns.com.
According to United States Pattern and Related Issues, by Andrew W. Pollock III, "the only trial pieces purported to have survived metallurgical testing in 1965 were the Dime, Quarter Dollar, and Half Dollar equivalent strikes in copper-nickel clad over copper." There is one set of a Dime, Quarter and Half struck by the Martha Washington dies that are permanently housed in the Smithsonian Institute, embedded in blocks of lucite. Click here to view the Martha Washington patterns permanently housed in a block of lucite at the Smithsonian.
Martha Washington dies have become the U.S. Mint's all-purpose design for testing new compositions, surfaces and planchet sizes. These experimental strikings were conducted both inside the Mint and outside by companies contracted by the U.S. Mint. Companies within the United States included IDX Inc, PMX Industries, and Olin Brass Corporation while Schuler AG in Germany struck coins overseas. Schuler AG is the supplier of Schuler coin presses to the United States Mint to strike our coinage.
Martha Washington dies have "fantasy designs" intended to avoid creating rarities with regular coinage motifs. The design of these proof dies was used by the U.S. Mint for metallurgical testing beginning in 1965 until 2011 when the dies were redesigned. The obverse features a bust of Martha Washington, with the inscription "VIRGINIA" above and the date "1759" (the year she married George Washington) below. The reverse typically features an image of Mount Vernon.
In addition to the cupro-nickel clad examples, these were struck in additional alloys as shown below which were taken from the "Final Report on a Study of Alloys Suitable for Use as United States Coinage to U.S. Department of the Treasury Bureau of the Mint February 12, 1965" by Batelle Memorial Institute:
- nickel J2115
- cupro-nickel clad J2116. These exist in both business strike and proof format in various finishes. A set of 5 was struck circa 1999 as follows: proof, reverse proof, brushed finish, satin finish and antique finish.
- 50% silver, 50% copper J2117
- silver clad J2118
- columbium (type 1) J2119
- columbium (type 2) J2120
- zirconium J2121
- Monel (nickel base alloy) J2122
- nickel-5% silicon with magnetic core J2123
- stainless steel (type 301-Type I) J2124
- stainless steel (type 301-Type Il) J2125
- stainless steel (type 302) J2126
This is a fascinating ongoing discovery since the U.S. Mint uses Martha Washington dies for experimental purposes in striking coins in various compositions, surfaces, with edge lettering and in Braille. This unique set of Martha Washington Test Pieces belongs in a world class U.S. coin collection.
Martha Washington 25C - Satin Finish
Martha Washington 25C - Brushed Finish
Martha Washington 25C - Reverse Proof Finish
Martha Washington 25C - Proof Finish
Martha Washington Test Pieces
        The U.S. Mint conducted metallurgical tests in 1999 on the golden colored manganese-clad planchets which would later be used for the Sacagawea Dollar. I discovered one of the three known Martha Washington Test Pieces struck on a Sacagawea Dollar planchet. It was certified by NGC as a dollar-sized test piece weighing 8.0 grams and was graded MS 66. It is listed as Judd #2185 on page 294 of eighth edition of United States Pattern Coins, Experimental and Trial Pieces. |
| Mike Byers' discovery was featured in a front page article in Coin World Copyright story reprinted by permission from Page 1 and Page 16 of the August 7, 2000 issue of COIN WORLD, Sidney, OH (coinworld.com)  |
Martha Washington Dies Used to Strike Half Dollar Experimental Test Pieces for U.S. Judd #2131-2143 NGC Certified & Encapsulated UNIQUE in Private Hands  Martha Washington dies were used by the U.S. Mint and contracted vendors for experimental testing.   This is the only known set of PROOF Uncancelled Martha Washington Half Dollar-sized dies in private hands. Martha Washington dies have become the U.S. Mint's all-purpose design for testing new compositions, surfaces and planchet sizes. These experimental strikings were conducted both inside the Mint and outside by companies contracted by the U.S. Mint. Companies within the United States included IDX Inc, PMX Industries, and Olin Brass Corporation while Schuler AG in Germany struck coins overseas. Schuler AG is the supplier of Schuler coin presses to the United States Mint to strike our coinage. |
Half Dollar Experimental Test Pieces For U.S. Judd #2131-2143   There are only three Martha Washington Half Dollar-sized Uncancelled Obverse Dies in private hands, two mint state and one proof. There is only one proof Martha Washington Half Dollar-sized Uncancelled Reverse Die known in private hands. This half dollar obverse Martha Washington Die was featured on the cover of Mint Error News Magazine Issue 44 (Spring 2018). |
1 Cent Experimental Test Pieces For U.S. Judd #2180    This is the only known Martha Washington Cent-sized Uncancelled Die in private hands. It was featured on the cover of Mint Error News Magazine Issue 51. There are only four other Martha Washington Half Dollar-sized Uncancelled Dies known in private hands, two mint state and two proof. They were used to strike the half dollar obverse for the experimental patterns. These Half Dollar-sized obverse Martha Washington Dies were purchased by Mike Byers. The first one discovered was featured both in Coin Week and on the cover of Mint Error News Magazine Issue #44 (Spring 2018). |
Martha Washington Test Pieces are featured in my
NLG Award winning book, World's Greatest Mint Errors:
